Please feel free to interact with the model. Click and drag.
This is a 3d model of a 97' Jeep wrangler soft top hinge.
The soft top was purchased through quadratec and the brand name of the replacement softtop was Bestop brand.
I used a 1/4 by 1" aluminum standoff to replace the spring loaded pin and terminated each end with small washers and screws.
The model was printed with makers are specifications as follows:
- 2 shells
- 100% fill
- 90 mmps feed rate
- Build plate @ 115 degrees
- 1.8 mm black filament